Wooden screens have a dual screening purpose; aesthetics and acoustic insulation.
They perfectly integrate with the environment and the landscape whilst also achieving good acoustic absorption and insulation levels.
The wooden panel adapts to different profile widths.
The wooden panel is formed of two parallel faces made from PYNUS SYLVESTRI treated wood slats with a chamber between the two filled with rock wool.
The panels are mechanically tested based on Standard EN 1794-1 and showed they can support very high loads in tests performed in accredited laboratories.
For certain solutions, there is the possibility of guaranteeing the mechanical properties through appropriate analytical calculations as provided for in current regulations.
– Due to the wooden panel’s configuration, maximum insulation and absorption is obtained.
– There is the possibility of having various combinations using planks horizontally and vertically to achieve different aesthetic effects.
– Excellent integration into the landscape due to its natural nature.
– A chemical treatment is applied to the wood in an autoclave that is respectful to the environment.
ANCHORING
Anchoring the profiles to the foundation is by means of varying diameter and length bolts according to the specific requirements of each project.
FOUNDATIONS
The foundation provides structural stability to the screen, formed of the pillars and acoustic panels, and must also ensure the stability of the surrounding ground.
The types of ground foundation are:
The panels are supported by HEB or HEA steel beams anchored to a foundation that must be calculated based on a study of the terrain, wind resistance, etc.
Steel profiles are used to fasten the panels to the beams, which are anchored to both the panel and the profile.
Aspects having an impact on the screen’s final effectiveness must be considered as a whole: compliance with on-site construction conditions, installation of the screen, type of panel, distance between beams, etc.
Equally as important as the panels’ characteristics are suitability of the type, height, insulation parameters, acoustic simulation, etc. It is also necessary to carry out adequate foundations to guarantee the system’s stability. Our engineers and calculation engineers jointly manage all these factors to ensure the screen functions properly.
At the client’s request, we carry out the entire assembly process:
– Foundation calculations and bearing structure.
– Staking based on topographic elevation.
– Execution of foundations.
– Assembly of support profiles and placement of panels.
Our engineering team has extensive calculation and optimisation experience, and our team of assemblers and associated subcontractors have spent years assembling acoustic screens in all conditions.
